News and Helpful Videos

Vickers Piggyback Hydraulic Pump Coding They are coded starting at the shaft end cover. Component codes are found for the P30, P50 and P75. If you have a part number that has underline under the number/s or group of letters those are special piggyback components. Just an example..not to used as an actual part number P50B 156 OK LOV22 8 COL3 0 P50A 298 BE OJ32 33 (just made up numbers). P – Pump50 – SeriesB – Model1. Shaft end cover 1562. Port end cover OK3. Gear housing LOV224. Drive shaft 85. Bearing carrier C6. Gear housing OL37. Connecting shaft...

Vickers F3 25VQT Thru Drive Hydraulic Vane Pump Vickers recommends that if your want good performance out of your unit use a full flow filtration so that it meets expectation from ISO clean code, 16/13 or better. Use OFP, OFR and OFRS filters. If you want the cartridge kits to go in the reverse , take out the 2 screws and reverse the spot of the inlet support plate and outlet support plate. Then put it back in, put back in the screws. Put on your pump cover to make sure everything is in alignment. Remove the cover and tighten...

DVPC-QC Quad Joystick Air Valve The maximum operating pressure is 142 PSI, port size is 1/8″ -27 NPT, flow rate is -40F to 212 F 11.7cfm at 100 PSI. The mounting  style is panel mounting and has a optional mounting attitude.  Here is a list of materials different parts of the unit are  made of: poppets – brass housing – nylon body – aluminum lever – steel seals – viton nitril They have the capability to operate at the same time with two valve functions with one lever. And can do it singular as well. Air valve balances the output...

Directional Control Valves KA18 Code                                                        Description AS                                                           inlet with screw adj. relief valve AT                                                           inlet with screw adj. tamper proof relief valve AD                                                           inlet with dual setting R/V CA                                                           inlet without relief valve   Combination inlet/ outlet sections AS = function 5 = high pressure port on top 0 = tank return port on top 0 = high pressure port on side 0 = tank return port on side   Port type                                     Porting Code no ports                                       0 1/2″ BSP                                      1 3/4″ BSP                                     2 SAE-8                                          3 SAE – 10                                      4 DAE – 12                                      5   If no ports are needed on top SAE –...

VA/VG 20-35 Tandem Work Sections When flow intensity to more than one operation function or when you need to operate at one time, that is when you need a tandem circuitry in valve bank. They feed the work ports from the open center passage. Then return flow is given back into he tank return passage and is in the downstream work partisans.  If a tandem section is in front of a tandem or a series section, which ever section is by the inlet will have first priority when it operates and the downstream tandem sections want work. If a parallel...