Vickers Hydraulic PVE Piston Pump – Adjustable Max Stop Control
Posted by Tammy Soper on
Vickers Hydraulic PVE Piston Pump – Adjustable Max Stop Control
You will need to loosen the locknut on the adjusting rod. Next turn the adjust rod clockwise to lower the maximum pump or turn it counterclockwise to bring it to it’s highest level of pump efficiency. To make sure it stays at the desired setting, make sure to tighten up the locknut. To get it to prime, manually adjust the control setting by 40% for the highest level of flow. This will make this control will engage the maximum pump flow to be externally adjusted from 25% to 100% and still offer all of the features of a pressure compensated pump.
Not all these models come with thru-drive on an integrated pump.
If you need further assistance with this topic, call us at 800-361-0068
sales@hydrostatic-transmission.com
