Sundstrand Sauer Danfoss Series 90 Filter Tube Changes

Posted by Tammy Soper on

At our Hydrostatic Pump Repair Site, we offer many types of Hydrostatic Transmission Repair and information relating to Hydrostatic Parts
Today we will discuss:

Sundstrand Sauer Danfoss Series 90 Filter Tube Changes
Changes to this were in February 1996. The reasons for this is to add the tube length for the remote filter adapter that was left off first time.
The filtration tube used in the manifold for the remote or integral pressure filtration could be too short in length. The filtration tube need to be measured for the correct length and replaced if it needs to be. The first repair requirement for this particular unit were built before N-95-41. The length that it needs to be now is 5.66 + 01 inches and 3.98 + .01 inches for the remote filtration tube.

The older filtration tubes are now obsolete and you can no longer get those parts.

If you need further help or have a question, please let us know.
Call 800-361-0068
email: sales@hydrostatic-transmission.com


Share this post



← Older Post Newer Post →


Leave a comment

Please note, comments must be approved before they are published.