Sundstrand Sauer Danfoss Series 90 100cc – Reduces the Length of The Pump

Posted by Tammy Soper on

Only the Series 90 – 100cc pump has been shortened up for work-ability purposes. Along with that some of the port locations will be changed also. On the chart below are some measurement changes.

* Dimensions from mounting face to auxiliary pump will be shortened .39″
Drive shafts will be shortened also. If you see a black square = will not interchange

With the unit being shortened the drive shaft, end cap gaskets, end caps and end cap to the variable housing screws will all be shortened. Your older style parts will not work in the newer unit. And will no longer be available for service parts either. If you replace endcap…all the other parts will need to be replaced to. Just check the chart for what you will need, if you replace parts.

 

If you need further help with this,

call us at 800-361-0068 I sales@htsrepair.com


Share this post



← Older Post Newer Post →


Leave a comment

Please note, comments must be approved before they are published.