Sundstrand Sauer Danfoss Series 40 NSS
Posted by Tammy Soper on
Sundstrand Sauer Danfoss Series 40 NSS
NSS – neutral start switch
Sauer put this switch in so that when the pump starts up, it has to be in the neutral position in order to work. It is a safety feature to prevent the pump from starting up.
This switch is wired into series with the engine starting circuit that can tell if it is in the neutral position, so the engine will not start.
There is two ways to get the switch:
A. screw terminals – no connector
B. two way sealed connector
On the chart it gives more detail about currents and what they are rated, etc.
If you need further help with this, please let us know.
800-361-0068