Sundstrand Sauer Danfoss EDC Remote and Feedback Control
Posted by Tammy Soper on
Sundstrand Sauer Danfoss EDC Remote and Feedback Control
Feedback Control
Are any operating variable of a machine that needs to have it’s output speed of a hydrostatic drive dependent upon an electronic control of the HST.
Usually examples … grain loss controls on combines or material level on a conveyor, auger, etc.
Picture is the one above..
Remote Control
This can be directly controlled by manually adjusting EC handles to give it that electrical remote control of a pump displacement. And a variable motor can be given a variable pump by using a HDC on the motor which is controlled from the pilot pressure signate of the EDC.
picture of this is below
If you need further info on these types of controls, please call us at 800-361-0068
sales@hydrostatic-transmission.com