Rexroth Pneumatic and Hydraulic Cylinders Stroke Adjustments

Posted by Tammy Soper on

Rexroth Pneumatic and Hydraulic Cylinders Stroke Adjustments

When your unit needs an accurate cylinder stroke or other infrequent stroke lengths are needed, then this infringed position should be made mention for specific strokes. Also, you will need to take in account for the length of the stroke when you order. Cushioning is not on this model for the end cap when you use the regular stroke adjuster. When you do need cushioning, look for other designs to have it on there.

If you need more info on this subject, please call us at 800-361-0068
sales@hydrostatic-transmission.com


Share this post



← Older Post Newer Post →


Leave a comment

Please note, comments must be approved before they are published.