Rexroth Fixed/Detachable Clevis & Universal Mounts
Posted by Tammy Soper on
The most widely used of all the mounts are the clevis or pin mounts. It has short strokes and medium/smaller cylinder procedures. The trunnion cap mount is used when the mount is applied when using stroke requirements causes the overall length to be too much. Pivot mounts needs to used when there is a pivot type rod end attachment.
The charts below will show dimensions affected by rod diameter and those that are not affected.
If you need further information on this topic, call us at 800-361-0068
or send email to sales@hydrostatic-transmission.com
