Rexroth DFSR Series Summation Control
Posted by Tammy Soper on
The input to the rexroth control pump and the second pump is restricted. It has two overload ratios 70/30 and 50/50. The first number goes with the rexroth and the second number goes with the second pump.
Ports
B Pressure Port S Suction Port L,L1 Case Drain Ports (L1 Sealed) P2 Pressure Port Pump 2 X Pilot Pressure Port
Control Info
Pilot Oil Consumption at it’s highest 5.5 L/min
If you have models 61 N00/11 is not adequate and the second pump more than likely flanged onto the thru drive.
And the power settings are set that way from the factory.
If you have any questions or you need help with a repair, call us at 800-361-0068
sales@htsrepair.com
