John Deere Crawler 755B – Planetary Housing Part 1

Posted by Tammy Soper on

John Deere Crawler 755B – Planetary Housing

Take off the screws (E).
Put in three cap screws (E) in the cover & tighten them up, distributing the it evenly to have it come apart from the planetary housing (H).
Take out the thru thrust washers (B), planet pinion (D) & rollers (C).
Also take out the dowels (G) & planetary pinion pin (A).
Look over the parts. If you find something wrong with them, you will need to replace them.

No. 1 parts list
A – planet pinion shaft – has 3
B – thrust washer – has 6
C – roller – has 57
D – planet pinion – has 3
E – cap screws – has 9
F – planet carrier cover
G- Hollow Dowel- has 3
H – planet housing

Look for our Part 2 to finish showing how to disassembly and assemble the planetary housing.
call us at 800-361-0068
sales@hydrostatic-transmission.com


Share this post



← Older Post Newer Post →


Leave a comment

Please note, comments must be approved before they are published.