John Deere Crawler 755B – Bucket Tooth Tip & Shank Attachment
Posted by Tammy Soper on
John Deere Crawler 755B – Bucket Tooth Tip & Shank Attachment
Tooth Tip
Take out the pin from washer side of the shank. (if the pin is taken out wrong, you can damage it).
Put the new tooth tip in the shank til the pin can be put together or til you align the hole (A) with the center of the slot in the tooth tip.
Next put the pin from the washer side of the shank.
It doesn’t need to touch the front edge of the tooth tip slot (B). And if you don’t put in correctly it will not work properly under load conditions. Either get another tooth tip or make the slot longer.
Shank
Take out both shanks and if they need replacing, do so.
The shanks have to right up against one another on cutting edge while nuts are being tightened up and the load on the cutting edge and not cap screws.
and then put on shanks.
If you need more info on this topic, call us at 800-361-0068
sales@hydrostatic-transmission.com
