How A Three Stage Motor Is Used
Posted by Tammy Soper on
How A Three Stage Motor Is Used
It is used to drive a fluid power pump that issues fluid power pressure. There is a disconnect switch that gives a disconnecting means a quick circuit protection. There are winding circuits in the control transformer. The secondary part is put on the common side, while the other side is fused. Also the selector switch does the control disconnecting.
The #1 piston goes from a start position to the right. Then the piston reaches its predestined position it stops and reverses itself to the start position. When #1 reverses then #2 goes from start to the left. Then when #2 has gone to its predestined spot, piston #1 stops & goes back to the beginning. Thus letting pressure be there for the rod end of the both pistons at the start. It needs to be able to reverse either of the pistons at most opportune time, while in forward stroke.
If you need further info, call us at 800-361-0068
sales@hydrostatic-transmission.com
