Denison Hydraulic Variable Volume Pumps Series 600, 700 & 800
Posted by Tammy Soper on
Denison Hydraulic Variable Volume Pumps Series 600, 700 & 800
The stem control is used all three sizes. It is mounted on a pad on top of the pump housing is right on top of the pump housing and to the pump hanger or yoke. This regulates the piston stroke length. Any movement of the sliding stem can be effected manually or mechanically to look out for maximum delivery as it is adaptable to linkage for mechanical control. The minimum delivery is on a pad on the bottom of the pump housing.
This series operate at 5000 PSI and put out 10, 20 and 35 gpm’s. The 600 series rate at 7gpm and 1200 rpm and 10 gpm at 1800 rpm. The 700 & 800 put out 20 & 35 gpm at 1200 rpm.
If you need further info on this subject, give us a call at 800-361-0068
sales@hydrostatic-transmission.com
