Denison Barrel and Auxiliary Shaft
Posted by Tammy Soper on
Barrel and Auxiliary Shaft Assembly
1. Fit in the barrel (1) with the bores facing
down on a clean area.
Place the hold down spring (3) into barrel counter-
bore.
Put in spring retainer (5) into counter bore and
seat next to spring.
Place the retaining ring (6) into barrel counter-
bore groove. Align retaining ring so that it is fully
seated in groove.
Fix the barrel stop (4) over auxiliary drive
shaft (2). Rotate barrel on side and put the auxiliary
drive shaft and barrel stop into the barrel
spline and hold down spring.
PARTS LIST
513-45381
Barrel & sleeve assy Pi 1 P only
S13-43965
Barrel & sleeve assy PHP only
033-71603
Auxiliary drive shaft
033-71562
Holddown spring
033-71561
Barrel stop
033-71560
Spring retainer
033-71564
Retaining ring
If more information is needed for this topic, please call us at
800-361-0068
sales@hydrostatic-transmission.com