Cylinders UT Series

Posted by Tammy Soper on

These are some heavy duty cylinders, they have 3000 PSI and a 2″ – 12″ bore. The rod seals are polyurethane polypak. The piston seals are glass filled teflon with oring expander and bronze filled teflon ear bands. Ports are SAE straight thread oring.

There are some other features you can have added to your cylinder such as all ports will be located 90 degrees to pivot pin unless you want it another way. They can do port of N.P.T. manifold sub plates, flange ports, fluid line connections and cartridge blocks. It can have liner bearings that are self aligning spherical bearings lubricating and can align themselves and have grease fittings can be put on all pin eye and single lug mounts

If you have a (*)

All ports are located at 90 degrees to pivot pin unless there is another option (*)

You can use pivot, but you must ask for them. (**)

If you need further assistance with these cylinders, please give us a call at

800-361-0068 and email us at sales@hydrostatic-transmission.com


Share this post



← Older Post Newer Post →


Leave a comment

Please note, comments must be approved before they are published.