News and Helpful Videos

Sundstrand Sauer Danfoss Series 90 Auxiliary Mounting Pad

Posted by Tammy Soper on

At our Hydrostatic Pump Repair Site, we offer many types of Hydrostatic Transmission Repair and information relating to Hydrostatic PartsToday we will discuss: Sundstrand Sauer Danfoss Series 90 Auxiliary Mounting Pad The mounting pad on a SAE C has been revised to cope with more endurance and lessen the amount of wear and tear. The older style and new style are interchangeable. The new mounting pads have it’s own frame size that do not include slotted mounting holes. The screws are the same, but don’t have washers.The old style pad is not longer available and the service parts are not...

Read more →

Sundstrand Sauer Danfoss Series 90 Control Gasket Change

Posted by Tammy Soper on

At our Hydrostatic Pump Repair Site, we offer many types of Hydrostatic Transmission Repair and information relating to Hydrostatic PartsToday we will discuss: Sundstrand Sauer Danfoss Series 90 Control Gasket ChangeThis new style has to be used with the MCV115 control. The old style has to be used with the MCV112 control, all manual displacement controls and the MCV111 electric displacement controls. IF you need further info on this, please contact us at 800-361-0068Email: sales@hydrostatic-transmission.com

Read more →

How a Return Line Filter Works

Posted by Tammy Soper on

At our Hydrostatic Pump Repair Site, we offer many types of Hydrostatic Transmission Repair and information relating to Hydrostatic PartsToday we will discuss: A return line filter is positioned in the circuit just before the reservoir. Range of illustration usually found in return line filters is from 40-3 micrometers. Advantages A return line filter catches the dirt in the system before it enters the reservoir.The filter housing does not operate under full system pressure and is therefore less expensive than a pressure line.Fluid can be filtered fine since system pressure is available to push the fluid through the element. Disadvantages...

Read more →

Sundstrand Sauer Danfoss Series 90 – Choose Correct Charge Pump

Posted by Tammy Soper on

At our Hydrostatic Pump Repair Site, we offer many types of Hydrostatic Transmission Repair and information relating to Hydrostatic PartsToday we will discuss: Sundstrand Sauer Danfoss Series 90 – Choose Correct Charge PumpThis section shows which charge pump replacement kit is correct, by looking at the diagram it will show you based on the following criteria:A) What size 55cc, 75cc, 100cc, 130ccB) What charge pump displacement ( 11, 14, 17, 20, 26 or 34 cc)C) Auxiliary Pad (if needed)D) What rotation (LH OR RH) If you still need further questions answered about this topic, please let us know.Call 800-361-0068Email: sales@hydrostatic-transmission.com

Read more →

Sundstrand Sauer Danfoss Series 90 55cc Breakdown

Posted by Tammy Soper on

At our Hydrostatic Pump Repair Site, we offer many types of Hydrostatic Transmission Repair and information relating to Hydrostatic PartsToday we will discuss: Sundstrand Sauer Danfoss Series 90 55cc BreakdownHere is a breakdown and parts list of the 90 series 55cc pump.This will help to identify what parts you may need for replacement or torepair your unit. We offer all kinds of breakdowns to help you see what you need to get your unit up and running to avoid downtime.Call today and get a quote or answer to a question.800-361-0068hydrostaticpumprepair.com

Read more →